1、For the safety of vehicles and people during loading, unloading and transporting goods, it is strictly forbidden to overload the goods in the compartment during loading, unloading or transportation.
2、When loading and unloading goods, open the left and right rear doors at the same time. The opening angle of the two rear doors is 0-270 degrees. After opening, if there is a door hook, use the door hook to fix the door before loading and unloading. For the safety of loading and unloading, open the left and right rear doors more than 180 degrees. After completing the loading and unloading work, close the left door first and then the right door, then turn the lock rod to lock it and lower the lock row. The rear door can be locked or sealed as needed. The opening angle of the side door is 180 degrees, and other operations are the same as the rear door.
3、Before loading the side curtain car, first loosen the side curtain tensioner on the corner column and the hook at the bottom of the curtain cloth, and then move the side curtain to one end of the compartment.
4、After loading the side curtain car with a middle wall, tighten the side curtain tensioner and the hook at the bottom of the curtain cloth. For side curtain vehicles without a middle wall, the sliding pillars should be fixed according to the use requirements, and then the side fences (cargo blocking cross bars) should be fixed, and finally the side curtains should be tightened.
5、For vans with cargo fixing devices in the compartment, make full use of the cargo fixing devices in the compartment to tie up the cargo.
6、When loading and unloading, forklifts must be used according to the requirements of each vehicle, and over-limit loading and unloading is strictly prohibited.